Our Products

Castings, ingots & ferrous scrap, engineered to your specification.

Ferrous and non-ferrous investment castings, aluminium ingots and graded ferrous scrap — melted, tested and dispatched against your purchase order with a material test certificate.

Alloy Coverage

Ferrous & non-ferrous, under one roof.

We melt and pour both families in-house, so the same metallurgical control — charge calculation, deoxidation, pouring temperature and post-cast heat treatment — is applied whether your part is steel or a copper- or aluminium-base alloy.

Ferrous — Iron & Steel Base Alloys

Carbon steel & low-alloy steel castings

Stainless steel — CF-8, CF-8M and equivalents

Valve bodies, flanges, pump internals, wear parts

Hardness, tensile and microstructure verification

Non-Ferrous — Aluminium & Copper Base Alloys

Aluminium — LM-6, LM-25, AlSi families

Bronze, gunmetal and aluminium bronze

Phosphorous bronze — PB-1, PB-2 bearing grades

Leaded & high-tensile brass components

Line 01

Investment Castings — Ferrous & Non-Ferrous

Investment castings from 1 kg to 10 kg produced by the lost-wax process and held to ±0.055 — supplied raw, proof-machined, heat treated or fully finished.

Ferrous and non-ferrous investment castings

✓

Aluminium Castings

Alloys

LM-6, LM-25, AlSi families

Applications

Pump & valve parts, housings, lightweight brackets

✓

Bronze Castings

Alloys

Aluminium bronze, gunmetal, LTB

Applications

Bushings, impellers, marine fittings

✓

Phosphorous Bronze Castings

Alloys

PB-1, PB-2 (CuSnP)

Applications

Bearings, worm wheels, sliding components

✓

Brass Castings

Alloys

Leaded & high-tensile brass

Applications

Electrical hardware, sanitary and instrument parts

✓

Steel & Ferrous Castings

Grades

Carbon, low-alloy and stainless grades

Applications

Valve bodies, pressure parts, wear components

✓

Custom Engineered Castings

Grades

As per customer drawing & chemistry

Applications

OEM components, replacement parts (1–10 kg, ±0.055)

Line 02

Metal Ingots

Aluminium ingots are our main product line, backed by bronze, phosphorous bronze and steel stock for melt-shops, die-casters and foundries — every lot supplied with a spectro report.

✓

Aluminium Ingots — Primary Line

Grades

LM-6, LM-25, ADC-12, AlSi alloys

Applications

Melt-shop feedstock for die-casting, gravity and investment foundries

✓

Bronze Ingots

Grades

Aluminium bronze, LTB, gunmetal

Applications

Bushings, bearings, marine hardware, valve bodies

✓

Phosphorous Bronze Ingots

Grades

PB-1, PB-2 (CuSnP)

Applications

High-load bearings, worm wheels, sliding components

✓

Steel & Ferrous Stock

Grades

Carbon and low-alloy steel charge stock

Applications

Ferrous melt additions and casting feedstock

Line 03

Ferrous Scrap

Sorted, sized and graded ferrous scrap supplied to induction and arc furnace melt shops, foundries and rolling mills. Every consignment is segregated by grade and checked for contamination so your charge chemistry stays predictable heat after heat.

✓

Heavy Melting Scrap (HMS)

Grades

HMS 1 & 2, sorted and size-reduced

Applications

Induction and arc furnace charge for steel melt shops

✓

Steel Turnings & Borings

Grades

Clean, de-oiled machining turnings

Applications

Economical charge make-up for foundries and re-melters

✓

Foundry Returns & Runners

Grades

Cast iron / steel gates, risers and rejections

Applications

Controlled-chemistry heats and melt make-up

✓

Re-rollable & Cast Iron Scrap

Grades

Re-rollable sections, CI borings and lumps

Applications

Rolling mills, CI foundries and ferrous melt additions

Don't see your grade?

Our metallurgical team can match almost any international standard or custom chemistry. Send the spec.

Send Spec Sheet →